Best Of
Re: DNSPing
Hi etw,
The traffic from your location is routing to the nearest site and that the latency experienced is expected behavior from your location.
At Verisign we are always reviewing the latest updates and security measures. We are currently reviewing both DNS over TLS and DNS over HTTPS, but we do not have specific implementation dates at this time. We will update when more information is available.
Best Regards,
Aaron
The traffic from your location is routing to the nearest site and that the latency experienced is expected behavior from your location.
At Verisign we are always reviewing the latest updates and security measures. We are currently reviewing both DNS over TLS and DNS over HTTPS, but we do not have specific implementation dates at this time. We will update when more information is available.
Best Regards,
Aaron
alee
1
Re: Verisign Public DNS Set Up: Configuration Instructions
Hi 58vl9123,
It appears Motorola does support Android 9 (Pie). However, it appears the moto e5 phone may have been factory installed with Android 8 (Oreo) as the original operating system (OS).
You may refer to the following solution provided on the Motorola Support page about how to check, and possibly update, the OS for your phone to Android 9 if needed: https://support.motorola.com/us/en/solution/ms98961
Once you can confirm that your phone has the OS Android 9 installed, then refer to the steps that my colleague alee provided above.
It appears Motorola does support Android 9 (Pie). However, it appears the moto e5 phone may have been factory installed with Android 8 (Oreo) as the original operating system (OS).
You may refer to the following solution provided on the Motorola Support page about how to check, and possibly update, the OS for your phone to Android 9 if needed: https://support.motorola.com/us/en/solution/ms98961
Once you can confirm that your phone has the OS Android 9 installed, then refer to the steps that my colleague alee provided above.
jodyb
1
Re: Does VERISIGN Public DNS Service Block Malicious Websites?
if we serve DNS via Windows 2012 Active Directory, should we change the DNS settings at the server/AD level for Verisign public DNS integration?
Re: I need a third DNS server
Hello vbayas,
Thank you for your inquiry. We provide four addresses for our resolvers total (two IPv4 and two IPv6). You will most likely need to leverage a combination of IPv4 and IPv6 should your device refuse to operate with less than three resolvers (please note we can't provide guidance specifically to your device's configuration). Please see below for the IP addresses:
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
Thank you for your inquiry. We provide four addresses for our resolvers total (two IPv4 and two IPv6). You will most likely need to leverage a combination of IPv4 and IPv6 should your device refuse to operate with less than three resolvers (please note we can't provide guidance specifically to your device's configuration). Please see below for the IP addresses:
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
Verisign Public DNS Forum Rules of Engagement
Verisign asks that you adhere to the following rules of engagement when posting Feedback in the Public DNS Forum. You agree that Feedback:
(1) shall not contain any viruses, worms, malware, Trojan horses, and other harmful or destructive content,
(2) shall not infringe the Intellectual Property Rights of any third party,
(3) is not spam, machine- or randomly-generated,
(4) does not contain unethical or unwanted commercial content designed to drive traffic to third party sites or boost the search engine rankings of third party sites, or to further unlawful acts (such as phishing) or mislead recipients as to the source of the material (such as spoofing),
(5) is not pornographic, libelous or defamatory,
(6) does not contain threats or incite violence towards individuals or entities,
(7) does not violate the privacy or publicity rights of any third party,
(8) and Feedback does not contain vulgar statements.
Please refer to the Verisign Public DNS Terms of Service for complete details.
(1) shall not contain any viruses, worms, malware, Trojan horses, and other harmful or destructive content,
(2) shall not infringe the Intellectual Property Rights of any third party,
(3) is not spam, machine- or randomly-generated,
(4) does not contain unethical or unwanted commercial content designed to drive traffic to third party sites or boost the search engine rankings of third party sites, or to further unlawful acts (such as phishing) or mislead recipients as to the source of the material (such as spoofing),
(5) is not pornographic, libelous or defamatory,
(6) does not contain threats or incite violence towards individuals or entities,
(7) does not violate the privacy or publicity rights of any third party,
(8) and Feedback does not contain vulgar statements.
Please refer to the Verisign Public DNS Terms of Service for complete details.
bhauger
3
Re: Verisign Public DNS Set Up: Configuration Instructions
Hi yssreddy
Are you experiencing the same issue as user jbala43?
Please conduct a nslookup and traceroute via CMD if you are using Windows, and provide us with the outputs.
nslookup command:
nslookup www.onlinesbi.com 64.6.64.6
nslookup www.onlinesbi.com 64.6.65.6
traceourte command:
tracert www.onlinesbi.com
Please also let us know if you are seeing any error message when you try to access the website https://www.onlinesbi.com via browser as well as the browser used.
Are you experiencing the same issue as user jbala43?
Please conduct a nslookup and traceroute via CMD if you are using Windows, and provide us with the outputs.
nslookup command:
nslookup www.onlinesbi.com 64.6.64.6
nslookup www.onlinesbi.com 64.6.65.6
traceourte command:
tracert www.onlinesbi.com
Please also let us know if you are seeing any error message when you try to access the website https://www.onlinesbi.com via browser as well as the browser used.
alee
2
Re: Verisign Public DNS Set Up: Configuration Instructions
Hello FL450,
You need to change to the DNS IP Address as mentioned in the configuration instructions. You may try to use just one if this is the only option you have but we perform maintenance on the VIPs as needed so it's important to configure both.
IPv4: 64.6.64.6 and 64.6.65.6
What I would suggest is to configure one for now then perform the test specified on "Testing your Verisign Public DNS Settings" section to make sure that you are connected. You can always switch between the IPs if this is the only option you have at this point.
You need to change to the DNS IP Address as mentioned in the configuration instructions. You may try to use just one if this is the only option you have but we perform maintenance on the VIPs as needed so it's important to configure both.
IPv4: 64.6.64.6 and 64.6.65.6
What I would suggest is to configure one for now then perform the test specified on "Testing your Verisign Public DNS Settings" section to make sure that you are connected. You can always switch between the IPs if this is the only option you have at this point.
knixon
6
Re: Verisign Public DNS Set Up: Configuration Instructions
Switched from Norton Connect to VeriSign DNS, so far works great and fixed my IPv6 issues I had.
Thanks for offering this public DNS
Thanks for offering this public DNS
Liam
2
Verisign Public DNS Set Up: Configuration Instructions
Below are the configuration instructions for various mobile devices, routers and operating systems as well as steps to test your set up once you have made the required configuration settings.
Microsoft Windows (Windows 7)
• Open Network Connections by clicking the Start button and then clicking Control Panel.
• In the search box, type adapter.
• Then, under Network and Sharing Center, click View network connections.
• Right-click the connection that you want to change, and then click Properties.
• If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
• Click the Networking tab.
• Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) OR Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
The Network Connection Properties dialog box
• To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary Verisign Public DNS servers.
64.6.64.6
64.6.65.6
• If needed, repeat the process for IPv6 settings using the following IPv6 addresses
2620:74:1b::1:1
2620:74:1c::2:2
Microsoft Windows (Windows 10)
• Right click Start and select 'Network Connections'
• Select 'Ethernet', then select 'Change adapter options'
• Right click the Network Connection you would like to change and select 'Properties'
• If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
• Select the text which says 'Internet Protocol Version 4 (TCP/IPv4)'
• Select 'Use the following DNS server addresses' then type in 64.6.64.6 for your Preferred DNS server and 64.6.65.6 for your Alternate DNS server. Select 'OK' when finished
• If needed, repeat the process for IPv6 settings using the following IPv6 addresses
2620:74:1b::1:1
2620:74:1c::2:2
Mac OSX (10.10.5)
• From the Apple menu, select System Preferences. The window shown below appears.
• Select Network
• Select a network interface from the sidebar.
• By default, your primary network interface is selected. If you use more than one interface to connect to the Internet, use these instructions to update the DNS servers for all of the interfaces.
• Click Advanced.
• Click the DNS tab
• Click the + button to add a new DNS server. Any existing servers may be removed from the list when you hit add. This is expected as you are replacing the default server(s).
• To use Verisign Public DNS
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
• Click OK.
• Click Apply.
Linux
DNS server settings on Ubuntu
• Click System > Preferences > Network Connections.
• Select the connection for which you want to configure Verisign Public DNS
• Click Edit - In the window, select IPv4 Settings or IPv6 Settings tab.
• In the DNS servers field, enter the Verisign Public DNS IP addresses, separated by a space:
• To use Verisign Public DNS
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
• Click Apply to save the change.
• If your distribution doesn't use Network Manager, your DNS settings are specified in /etc/resolv.conf.
Routers
Generic Procedure for configuring DNS server settings on your Router.
Each router has a different user interface; please consult your router documentation for details.
• Access your Router's administration console using a browser.
• Based on your configuration, you may be required to enter a password to access the console.
• Look for the screen where DNS Server settings are specified.
• Note down the existing IP addresses (for future reference) specified in the primary DNS and secondary DNS fields.
• Replace those addresses with the Verisign Public DNS IP addresses
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
• Save and exit.
Mobile Devices
Generic Procedure for configuring DNS server settings on your Mobile Device.
DNS settings are usually configured under the Wi-Fi settings section; please consult your mobile device/provider documentation for details.
• Access the Wi-Fi settings screen on your mobile device.
• Look for the screen where DNS Server settings are specified.
• Note down the existing IP addresses (for future reference) specified in the primary DNS and secondary DNS fields.
• Replace those addresses with the Verisign Public DNS IP addresses
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
• Save and exit.
Testing your Verisign Public DNS Settings
After you make changes specific to your device
1. Clear your browser cache.
2. In your browser address bar, type http://www.Verisign.com/. If it resolves and you see the Verisign home page, the new settings have been successfully applied.
3. If it does not resolve correctly, roll back the DNS changes you made and try steps 1 and 2 again.
4. If the resolution still does not work there may be a problem with your network settings, please contact your ISP or network administrator for further assistance.
Microsoft Windows (Windows 7)
• Open Network Connections by clicking the Start button and then clicking Control Panel.
• In the search box, type adapter.
• Then, under Network and Sharing Center, click View network connections.
• Right-click the connection that you want to change, and then click Properties.
• If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
• Click the Networking tab.
• Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) OR Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
The Network Connection Properties dialog box
• To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary Verisign Public DNS servers.
64.6.64.6
64.6.65.6
• If needed, repeat the process for IPv6 settings using the following IPv6 addresses
2620:74:1b::1:1
2620:74:1c::2:2
Microsoft Windows (Windows 10)
• Right click Start and select 'Network Connections'
• Select 'Ethernet', then select 'Change adapter options'
• Right click the Network Connection you would like to change and select 'Properties'
• If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
• Select the text which says 'Internet Protocol Version 4 (TCP/IPv4)'
• Select 'Use the following DNS server addresses' then type in 64.6.64.6 for your Preferred DNS server and 64.6.65.6 for your Alternate DNS server. Select 'OK' when finished
• If needed, repeat the process for IPv6 settings using the following IPv6 addresses
2620:74:1b::1:1
2620:74:1c::2:2
Mac OSX (10.10.5)
• From the Apple menu, select System Preferences. The window shown below appears.
• Select Network
• Select a network interface from the sidebar.
• By default, your primary network interface is selected. If you use more than one interface to connect to the Internet, use these instructions to update the DNS servers for all of the interfaces.
• Click Advanced.
• Click the DNS tab
• Click the + button to add a new DNS server. Any existing servers may be removed from the list when you hit add. This is expected as you are replacing the default server(s).
• To use Verisign Public DNS
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
• Click OK.
• Click Apply.
Linux
DNS server settings on Ubuntu
• Click System > Preferences > Network Connections.
• Select the connection for which you want to configure Verisign Public DNS
• Click Edit - In the window, select IPv4 Settings or IPv6 Settings tab.
• In the DNS servers field, enter the Verisign Public DNS IP addresses, separated by a space:
• To use Verisign Public DNS
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
• Click Apply to save the change.
• If your distribution doesn't use Network Manager, your DNS settings are specified in /etc/resolv.conf.
Routers
Generic Procedure for configuring DNS server settings on your Router.
Each router has a different user interface; please consult your router documentation for details.
• Access your Router's administration console using a browser.
• Based on your configuration, you may be required to enter a password to access the console.
• Look for the screen where DNS Server settings are specified.
• Note down the existing IP addresses (for future reference) specified in the primary DNS and secondary DNS fields.
• Replace those addresses with the Verisign Public DNS IP addresses
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
• Save and exit.
Mobile Devices
Generic Procedure for configuring DNS server settings on your Mobile Device.
DNS settings are usually configured under the Wi-Fi settings section; please consult your mobile device/provider documentation for details.
• Access the Wi-Fi settings screen on your mobile device.
• Look for the screen where DNS Server settings are specified.
• Note down the existing IP addresses (for future reference) specified in the primary DNS and secondary DNS fields.
• Replace those addresses with the Verisign Public DNS IP addresses
IPv4: 64.6.64.6 and 64.6.65.6
IPv6: 2620:74:1b::1:1 and 2620:74:1c::2:2
• Save and exit.
Testing your Verisign Public DNS Settings
After you make changes specific to your device
1. Clear your browser cache.
2. In your browser address bar, type http://www.Verisign.com/. If it resolves and you see the Verisign home page, the new settings have been successfully applied.
3. If it does not resolve correctly, roll back the DNS changes you made and try steps 1 and 2 again.
4. If the resolution still does not work there may be a problem with your network settings, please contact your ISP or network administrator for further assistance.
bhauger
10
© 2019 VeriSign Inc. All rights reserved. VERISIGN; the Verisign logo; and other trademarks, service marks and Verisign designs are registered or unregistered trademarks of VeriSign Inc. and its subsidiaries in the United States and in foreign countries.
Forum Software Powered by Vanilla